Description

Model#: AW-TD130W Product Description: This AW-TD130W plug-n-play temperature controller with WiFi connectivity is designed for applications such as beer fermentation or kegerator. It has one power output for cooling control and another for heating control. Utilizing both cooling and heating device control, refrigerators can be controlled at specific temperatures regardless of the environmental climate. User can get access to his controller through AuberWIFI App via internet. No wiring is required for this plug-n-play controller. User only needs to plug in the power cord from heater/cooler to the output sockets on the controller. Both the heating and cooling control modes make use of a simple on/off control. This controller is similar to the control mode of mechanical thermostat but with much higher precision due to the adjustable hysteresis band, precise temperature sensor and digital readouts. In addition, an anti-short function has been provided to protect the compressor from being cycling on/off during high pressure Freon. Unlike other two-stage temperature controllers with economic NTC/PTC thermistor sensors, AW-TD130W use a digital silicone bandgap sensor as a more reliable and accurate option for moist environments. These silicone bandgap sensors can be fully immersed in water over extended periods of time without any issues, and perform with more precision and uniform accuracy over an entire specific temperature range. One free hanging style sensor (2" sensor tip) is included in this listing. It has food grade silicone insulation cable, compared to PVC jacket used on most of other sensors on the market. Silicone is safer than PVC for food application, especially when immersed in solutions that contains alcohol because the flexible PVC contains plasticizer that is easier to leach out in alcohol. Silicone will also withstand higher temperature. Update note: "reversed logic" has been added to this model, which can activate the output when temperature is in a range set by HSP (heating setpoint) and CSP (cooling setpoint). Standard TD130 can only activate the heater output if temperature is lower than HSP, and activate the cooler output if temperature is higher than CSP. For details, see supplementary manual here. WIFI Function: This controller can be operated via your smartphone through the Wi-Fi connection. The app based control feature gives a sense that your controller is always in your pocket. And now, it's easier than ever to control all the features remotely and directly on the AuberWIFI app from your smart device. (As a good analogy, the difference between the web and app based interface is just like the experiences of finding the local weather information by using a weather app or by browsing the weather.com). Such advantages of using app based control include: 1) Remote access. Using the AuberWIFI app, you are able to check/change the temperature set point and all the parameters at any time from anywhere, as long as you are connected to a cellular or WIFI internet. You will be able to monitor the device when you are not at home, doing grocery shopping, or traveling in another city. 2) Easy to view and analyze performance. Our app offers graphic plots to show the temperature data over the time. You can also export the data to a CSV file for further analysis. 3) User-Friendly interface. Setting up control parameters through your smartphone is an easier and quicker alternative than the traditional keypad. Through the keypad and two-line display, you may need to refer to its manual to recheck the parameters from time to time again. But with the innovative AuberWIFI app, the function and setting range of each parameter will be denoted on the screen to save the hassle of maneuvering the device. 4) An integrated solution. The AuberWIFI app gives the user a sense that their phones are integrated as a part of their controller. The system has more functions and is easier to operate. Moreover, you can manage multiple devices from the Auber WIFI Device family just with a few clicks. Instead of using one app for only one device model, our smart phone app acts as the central control hub for different types of AuberWIFI devices, giving you a better user experience than web based interfaces of other Wi-Fi enabled devices. Note: AW-TD130A uses the Auber's 2nd Gen WIFI chip, which has better router compatibility (including mesh router) and it has push notification features. Specifications: Temperature Control Range -50 ~105°C, -58 ~ 221°F Temperature Resolution 0.1°C (between -9.9 ~ 99 °C) 1°C (between -50 ~ -10°C, 100~120°C) 0.1°F (between -9.9 ~ 99.9°F ) 1°F (between -58 ~ -10 °F,100 ~248°F) Temperature Accuracy 0.5 °C or 0.9 °F Temperature Control Mode On/Off Control. Heating and Cooling Temperature Control Output 10A, 120V or 240V AC * Audio Alarm High and Low Limit Sensor Type Silicon Band Gap Sensor Sensor Size Diameter 0.25” OD (6.35 mm) x 2"(50 mm) long Operating Temperature 0 ~ 120°F (-20 ~ 50°C) Dimension 91x140x46mm Input Power 85 ~242VAC, 50Hz/60Hz Sensor Cable Length 6ft (2m) Power Cable Length 3ft (1m) Warranty 1 Year Limited Warranty Note : The controller can display temperature unit in Celsius or Fahrenheit. Unlike the PID controller we sell, this on/off controller will not hold the temperature as tight if the system had very slow and delayed response. Some temperature overshoot is normal. Either the heating or the cooling device is limited to 10 Amps. The output voltage is the same as the input voltage. When the controller is plugged into 120V AC, the output will be 120VAC. If the controller is connected to 240 VAC, the output will be 240VAC also. The input power plug is a US NEMA 5-15P plug. The output sock is US NEMA 5-15R. Click here for the instruction manual of AW-TD130A. Thousands of these controllers have been sold for very board range of applications from medical device manufacturing to beer brewing. Our customer base includes control engineering expert and hobbyist with very basic electronic knowledge. Our feedback rating is a good indication about the success rate of their projects. Please contact us if you are not sure whether this controller will work for your application. *Shipping note for international/non-US customers: The default international shipping method for this listing is FedEx or DHL. Estimate delivery time is about one week. Please provide your physical address and correct contact information for the package delivery (physical address is needed). For customers in remote/rural area, to avoid remote area delivery surcharge, we will ship your order out by USPS instead automatically (US postal service). It will be delivered about 1-2 weeks to Canada, 3-4 weeks to other countries. For special inquiry regarding our international shipping, please contact us.